* When these errors appear your red light of Samsung SL-M2875FW/M2875FD/M2675FN/M2675F is flashing
Why your Samsung SL-M2875FW/M2875FD/M2675FN/M2675F have above errors:
- Each Samsung printer have a toner cartridge chip.- Your Samsung SL-M2875FW printer are used a toner cartridge chip to managing the printed page and computing toner powder coverage on opc drum,this makes sharper prints and save more toner powder.
- Samsung SL-M2875FW/M2875FD/M2675FN/M2675F Toner cartridge chip are limited computing toner powder coverage on opc drum.
- It can only be calculated approximately 1.500 - 2.000 pages
- When Samsung SL-M2875FW/M2875FD/M2675FN/M2675F printer toner cartridge chip count down to Zero, your printer can not use and show above errors.
How to repair Samsung SL-M2875FW/M2875FD/M2675FN/M2675F toner cartridge is not installed and install toner message:
Remedy 1: Remove old Samsung SL-M2875FW toner cartridge and change new toner cartridge:
- Each Samsung SL-M2875FW/M2875FD/M2675FN/M2675F toner cartridge (Samsung MLT-D116S) costs about $38 – $70 depending on its supplier and manufacturer.- But when the chip of new toner cartridge count down zero, you need replace new toner cartridge again.
- Changing toner cartridge seems to be suboptimal because when printer runs out of toner, we also need to change new toner cartridge => money wasting
Remedy 2: Remove old Samsung toner cartridge chip and replace new chip:
- Each Samsung SL-M2875FW/M2875FD/M2675FN/M2675F’s toner chip costs about $6 – $10 depending on its supplier.- When new Samsung toner cartridge count down to zero you need replace new one!
- Changing toner chips seems to be more optimal but when printer runs out of toner, we also need to change new toner chip.
Remedy 3: Use firmware reset fix to reset your Samsung SL-M2875FW/M2875FD/M2675FN/M2675F chip counter:
- Samsung SL-M2875FW/M2875FD/M2675FN/M2675F’s reset software costs about: $65 USD => money saving- Reset software automatically impacts to Samsung printer firmware so printer ignores paper counter. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.
Before reset your Samsung SL-M2875FW/M2875FD/M2675FN/M2675F:
- Identify accurate version, serial and crum of SL-M2875FW/M2875FD/M2675FN/M2675F printer.- Printer’s Driver is installed on computer.
- Check the connection between computer and printer to make sure it works well.
- Toner chip located over the cartridge is removed or covered by tapes.
- Remove connection gates such as USB gate, LPT gate from computer (Except for printer, keyboard, mouse).
- Make sure the electric power works well during soft-ware running process (you should use UPS for printer and computer to prevent them from loosing electric power).
Warning: When you are running firmware, do not install the manufacturer’s firmware because this firmware is displacement. If you are wrong in one of those beyond rules, your printer can be meet faulty problems and can not be recovered to the original status.
* How to buy this firmware:
You can buy this firmware by contact to: helinacare@gmail.com and payment via paypal email: helinacare@gmail.comHave a happy day!